Product Description

Crete-Trete 309-VOC is a high solid, water-based cure for concrete. It exceeds ASTM specifications and all state and federal VOC regulations. Crete-Trete 309-VOC is an ASTM 309 Type I class B or Type I-D class B curing compound for use on fresh concrete.

• Is water-based
• Covers 10 M²/Litre
• Is fast drying.
• Has no unpleasant odors
• Physically combines with a surface matrix of the concrete.
• Is non-flammable
• Applies easily by sprayer, roller, or brush
• Does not contain cheap “filler resins”
• Shows temporary “white when wet” colour where freshly applied
• Wets fresh concrete better than solvent-based cures
• Dries clear

Limitations

Do not apply over puddles on the surface of the concrete. Do not use if the temperature drops below 10° C (50° F). Protect from freezing.

Applicable Standards

Exceeds ASTM C-309-89 for water retention at the rate of 10 M²/Litre. Exceeds California SCAQMD VOC rule 1113-90. ASTM C-309 officially replaces canceled Federal Specification TT-C-800A.

Application Instructions

Removal: Remove cured films of Crete-Trete 309-VOC with Cresset’s Floor Stripper 90.