Background

A membrane-forming curing compound is a liquid material applied to concrete to restrict the loss of water during the early hardening period.

It consists of non-volatile solids mixed with either water or a solvent. The solvent, or blend of solvents, can be an aliphatic or aromatic hydrocarbon, or another type of organic solvent.

After application, the volatiles evaporates leaving the solid material deposited as a thin film over the concrete surface.

Product Description

Surface Cure W curing compound is a Class A curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.

Surface Cure W, when applied by the correct method and at the recommended application rate, leaves a dried waxy film, as Surface Cure W is based on petroleum waxes combined with other additives.

Use

Mix prior to use. Ensure SURFACE-CURE W is homogeneous.

Calculate the area to be treated, and pre-measure the volume of Surface Cure W.

Apply one full coat forming a continuous film at a rate of 5m2/L. wet on wet, as required to obtain the necessary application rate or use the volume. Ensure there are no misses.