Overview
Product Description
COLORTEC MAX “CM” is a ready-to-use and invisible water-repellent protective coating for the all-round-protection of mineral surfaces, especially for the protection against common and aggressive dirt, for example, oil- and food-spills, efflorescence, industrial emissions, etc. CM is invisible when dried.
Advantages in application:
COLORTEC MAX is solvent-free but has a very high penetration depth and an extremely high alkali resistance. CM is weather-resistant, capable of breathing, extremely dirt- and water-repellent, non-yellowing, and increases the resistance to the wear of the freeze-thaw-succession. CM does not get sticky during the drying time and does not create a glossy effect or change the natural colour of the surface.
CM is a water-based product and therefore can be applied immediately after production of concrete tiles/slabs or panels, for example after the polishing/sand-blasting of cast-stone-surfaces, because CM is water-vapor-permeable and is not adhesive to most materials during the drying process.
Warning: CM is not suitable for sealed or non-absorbent surfaces. No application is recommended at temperatures below +5°C. Up to now, it has never been experienced, that the colour of the surface has been enhanced or brightened by COLORTEC MAX, although this can not be ruled out completely.
Fields of Application
For all absorbent natural and cast stone surfaces, e.g. polished concrete tiles, terrazzo, exposed aggregate concrete, grid/sand-blasted and smooth concrete surfaces, natural stone, brick, etc. CM can be used for interior and exterior applications.
